Phase Converter manufacturer: Phase-A-Matic, Inc.Sizing Assistance
   HOME
.
.
  HOME / Sizing Assistance / General

.

Sizing Assistance / General   -phase converter sizing

Fill in the following form for the proper sizing recommendation, one for each machine. Then click on the SUBMIT button at the bottom of this form. The form will be instantly sent via e-mail to the technical support staff at Phase-A-Matic. Once it is received, it will be reviewed by technical support to determine which converter would best suit your application, and you will be contacted by Phase-A-Matic, Inc. Thank you for your inquiry.

       NOTE: Please fill in a phone or fax number, e-mail address or mailing address, or we cannot respond to this form.

 

     Name..... .     Company Name    

     Phone                            Fax 

     E-mail                        E-mail    (verification)

     Address                         City 

     Zip Code       State / Province                  

     Country    
.
_______________________________________________________________________________________________
     Machine Information:

     1. Type of equipment (lathe, pump, mill, etc.)

     2. Machine brand (not motor)   Model of machine

     3. Country of mfr. of machine      of motor

     4. Nameplate voltage rating  Amperage rating    RPM

     5. Is the motor one or two-speed?    Motor is

     6. Horsepower        kW rating          kVA rating

     7. Single-phase voltage available:     Cycles     

     8. 3-phase voltage required       Cycles  

     9. Percent of output required:    1-67%          68-100%

    10. Does this have a heavy starting load? Yes        No

    11. Does this start frequently? Yes        No

    12. Does this instant reverse? Yes        No

    13. Does the machine stall out?   Yes       No

    14. It is:    belt drive      direct drive       gear drive

    15. It has:     flywheel        hydraulic pump        neither

    16. Motor is

    17. 3-phase power required

    18. CNC or other electronic controls (rheostat, variable frequency drive, etc.):
         

    19. If the machine is a CNC machine, does it have regenerative braking? Yes        No

    20. If there are 3-phase heating elements, what is their amp rating?   or kW rating?

    21. Remarks:
         

          For further sizing assistance call technical support at Phase-A-Matic, Inc.: 1-800-962-6976   


     Also see sizing information concerning:

PRODUCTS PAGE  |  ROTARY CONVERTER  |  CNC ROTARY CONVERTER  |  VOLTAGE STABILIZER  |  STATIC CONVERTER

POWER GENERATOR  |  FREQUENCY CONVERTER  |  CONTACT US  |  HOW TO ORDER  |  HOME PAGE

 
 

Phase-A-Matic, Inc.    39360 3rd St. E., Ste. 301   Palmdale, Ca. 93550-3255    Toll free: 1-800-962-6976    Ph: 1-661-947-8485    Fx: 1-661-947-8764