Phase Converter manufacturer: Phase-A-Matic, Inc.Sizing Assistance
   HOME
.
.
  HOME / Sizing Assistance / Mills & VMCs

.

Sizing Assistance For Mills & VMCs   -phase converter sizing

Fill in the following form for the proper sizing recommendation, one for each mill. Then click on the SUBMIT button at the bottom of this form. The form will be instantly sent via e-mail to the technical support staff at Phase-A-Matic. Once it is received, it will be reviewed by technical support to determine which converter would best suit your application, and you will be contacted by Phase-A-Matic, Inc. Thank you for your inquiry.

       NOTE: Please fill in a phone or fax number, e-mail address or mailing address, or we cannot respond to this form.

 

     Name          Company Name    

     Phone                            Fax

     E-mail                        E-mail   (verification)

     Address                         City

     Zip Code       State / Province                 

      Country  
.
_______________________________________________________________________________________________
     Machine Information:

     1. Brand of mill (not motor)   Model # of mill

     2. Country of mfr. of mill   of motor

     3. Nameplate voltage rating  Amperage rating    RPM

     4. Is the motor a one or two-speed motor?

     5. Horsepower:          kW rating:         KVA rating:

     6. Single-phase voltage available         Cycles:    

     7. 3-phase voltage required         Cycles:  

     8. Percent of output required: 
             1 to 67% power is enough.       
             68 to 100% power is required. 

     9.  Does the machine start frequently, as in once a minute or more? Yes        No

    10. Does the motor instant reverse, as in rigid tapping? Yes        No

    11. Does the machine stall out?   Yes       No

    12. The mill has:
          Hand operated vari-speed spindle drive.
          Step-pulley speed change.
         
VFD (Variable Frequency Drive) electronic speed control.

    13.  The motor windings are:  Wye-wound      Delta-wound      Don't know

    14. 3-phase power required must be:

CNC or other electronic controls (rheostat, variable frequency drive, etc.):
         

    16. If it is a CNC machine, does it have regenerative braking? Yes   No   Don't know

    17. If the machine has regenerative braking, it is:
         Line regenerative braking
         Resistance regenerative braking
         Don't know
         NO regenerative braking

    18. Remarks:
         

         For further sizing assistance call technical support at Phase-A-Matic, Inc.: 1-800-962-6976   


     Also see sizing information concerning:

PRODUCTS PAGE  |  ROTARY CONVERTER  |  CNC ROTARY CONVERTER  |  VOLTAGE STABILIZER  |  STATIC CONVERTER

POWER GENERATOR  |  FREQUENCY CONVERTER  |  CONTACT US  |  HOW TO ORDER  |  HOME PAGE

 
 

Phase-A-Matic, Inc.    39360 3rd St. E., Ste. 301   Palmdale, Ca. 93550-3255    Toll free: 1-800-962-6976    Ph: 1-661-947-8485    Fx: 1-661-947-8764